• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

1986 K75C System Case lock lubrication

jad01

jad01

New member
I replaced the worn out latches on one of my side cases, and was thinking I should clean and lubricate the tumbler mechanisms/key locks while I have them out. Normally I would wipe them down with a clean cloth and apply graphite lock lubricant, but thought I'd ask to see if there is a specific recommended lubricant for these that I am unaware of before I proceed. :dunno
 
jad01 said:
I replaced the worn out latches on one of my side cases, and was thinking I should clean and lubricate the tumbler mechanisms/key locks while I have them out. Normally I would wipe them down with a clean cloth and apply graphite lock lubricant, but thought I'd ask to see if there is a specific recommended lubricant for these that I am unaware of before I proceed. :dunno
Click to expand...

I clean them with WD40 and then use "Lock Oil" that comes in a little blue bottle I've had for 20 years. It contains graphite in suspension in the liquid which is supposed to evaporate leaving the graphite in the lock. Plain old Three In One oil or sewing machine oil will work just as well in my opinion. These are bag locks, not fine Swiss watches.
 
You must log in or register to reply here.

Similar threads

teddunlap
2002 R1150RS side case locks frozen
Replies
1
Views
359
kbasa
kbasa
senseamidmadness
Do your System Cases have floppy lids? Here's an easy, riveting solution.
Replies
2
Views
1K
barryg
B
1
K1600 Grand America saddlebag lock is stuck!
Replies
7
Views
5K
jerryleejr
J
L
'03 K1200GT Key stuck in lock cylinder
Replies
5
Views
6K
lljanssen
L
bigjohnsd
118th Congress - H.R. 906 - Motor Vehicle - Right to Repair!
2
Replies
25
Views
2K
fbt80
fbt80
Back
Top