04 R1150RT having issue getting drive shaft out

cavedweller22 · May 24, 2020

Howdy Experts,

Well a little update... after many gruling hours with no success.. I bought another engine.
I am at the point of last 4 nuts before dropping engine with tranny attached.. but..
I could not pop the driveshaft loose from transmission...

Any thoughts?

gsaddict · May 24, 2020

I assume you have not removed the paralever?

cavedweller22 · May 25, 2020

She looks like a beaten pinata..

GSAddict said:
I assume you have not removed the paralever?

Paralever off bike..
Right now the bike is suspended, going to drop engine with transmission (nearly everything else off bike), the drive shaft is not budging.

gsaddict · May 25, 2020

cavedweller22 said:
Paralever off bike..
Right now the bike is suspended, going to drop engine with transmission (nearly everything else off bike), the drive shaft is not budging.

This is how I do it.
Lever the shaft to the left.

To reinstall, lube with moly and good sharp rap with a dead blow hammer from the end

04 R1150RT having issue getting drive shaft out

cavedweller22

New member

gsaddict

Pepperfool

cavedweller22

New member

gsaddict

Pepperfool

Attachments

Similar threads

Forum statistics

Share this page