• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

A question for you anal clean freaks out there

Sandpaper

So, typically only a very thin layer of plastic gets faded/yellowed by UV. If you try a 600 grit sand paper and sand of a few thousands of an inch, you may reveal non-yellowed white underneath. Try it on a small area and see if it works - cheap solution if it does.
 
So, typically only a very thin layer of plastic gets faded/yellowed by UV. If you try a 600 grit sand paper and sand of a few thousands of an inch, you may reveal non-yellowed white underneath. Try it on a small area and see if it works - cheap solution if it does.

Good idea. I'll give that a try and report back.
 
If you try a 600 grit sand paper and sand of a few thousands of an inch, you may reveal non-yellowed white underneath. Try it on a small area and see if it works - cheap solution if it does.

I used 600 and it worked great. Two thumbs up to you, sir! :thumb:thumb
 
Back
Top