Immersion_Suit
New member
Solved: Weiser Teknik & Hex EZCan
Has anyone ever used the two in combination? I'm told it's easy, but I'm stumped by how to attach the Weiser lights to the Hex canbus controller. The led's plug into the existing hot and return wires and there's a third that's supposed to go to Weiser's relay. Do I connect that control wire into the Hex? Any help would be greatly appreciated.
Woot woot, I got a recommendation from Hex to ask for someone at Adventure Designs in CA who have done builds for them in the past. He was very helpful, despite my not purchasing either the hex or lights from them, and the fix is very simple. The only thing one has to do to get the Weiser lights to work with the Hex EZCan is to connect the brake signal wire to the hot wire on the Hex Can plug and tape off that plug's ground wire. Here's a picture and diagram I did for anyone else who wants to do this in the future:
Has anyone ever used the two in combination? I'm told it's easy, but I'm stumped by how to attach the Weiser lights to the Hex canbus controller. The led's plug into the existing hot and return wires and there's a third that's supposed to go to Weiser's relay. Do I connect that control wire into the Hex? Any help would be greatly appreciated.
Woot woot, I got a recommendation from Hex to ask for someone at Adventure Designs in CA who have done builds for them in the past. He was very helpful, despite my not purchasing either the hex or lights from them, and the fix is very simple. The only thing one has to do to get the Weiser lights to work with the Hex EZCan is to connect the brake signal wire to the hot wire on the Hex Can plug and tape off that plug's ground wire. Here's a picture and diagram I did for anyone else who wants to do this in the future:
Last edited: