Handlebar Risers F750GS - Cable Extensions?

numbersman · Mar 18, 2020

I moved my 1-3/4" ROX risers from the F700 to the F750. The left side cables are pretty tight at full left lock. The dealer said there is no way to extend the Canbus wiring and the cable would have to be a custom build. Anyone found a way to extend these?

motodan · Mar 18, 2020

numbersman said:
I moved my 1-3/4" ROX risers from the F700 to the F750. The left side cables are pretty tight at full left lock. The dealer said there is no way to extend the Canbus wiring and the cable would have to be a custom build. Anyone found a way to extend these?

Assume you mean when full right lock. Imagine it would be way cheaper to sell those 1-3/4 risers and get some 1-1/4 ones. Your thicker wallet should tilt you forward enough to make up for the lost 1/2 inch.

numbersman · Jun 7, 2020

The reason I got the Rox tilting risers is to bring the bars back toward me. Worked OK on the F700 but it is the left lock turn that stresses the cables on the F750. It is a bit better after taking off the cable guide that is screwed to the triple tree, but I still cannot bring back as far as I would like.

motodan · Jun 8, 2020

https://www.beijer.com/en/news/what-can-be-done-with-the-can-bus/

Handlebar Risers F750GS - Cable Extensions?

numbersman

New member

motodan

Active member

numbersman

New member

motodan

Active member

Similar threads

Forum statistics

Share this page