Hi all,
Question about tensioning the chain on my 2014 Sertao. I’ve read through the manual and can see the sticker on the side of the swing arm stating the tolerances, however, I can’t for the life of me make out whether the measurement should be made center-to-center on the same pin, top of a plate when the chasing is depressed to bottom of a plate when it’s lifted, or in some other fashion. Looks like the tolerances are fairly tight, or at least tight enough that when I measure one way tension is off, measured the other it’s still within tolerances. Any advice greatly appreciated!
~Josh
Question about tensioning the chain on my 2014 Sertao. I’ve read through the manual and can see the sticker on the side of the swing arm stating the tolerances, however, I can’t for the life of me make out whether the measurement should be made center-to-center on the same pin, top of a plate when the chasing is depressed to bottom of a plate when it’s lifted, or in some other fashion. Looks like the tolerances are fairly tight, or at least tight enough that when I measure one way tension is off, measured the other it’s still within tolerances. Any advice greatly appreciated!
~Josh