Results 1 to 4 of 4

Thread: Bosch 15727 O2 sensor on R1100RS

  1. #1

    Bosch 15727 O2 sensor on R1100RS

    Been tuning on this new to me 1999 R1100RS. Reset the TPS and throttle plate angles to "latest" procedure and deactivated the dobeck 1033 on the bike. Ordered a AF-XIED to play with. The prev owner told me that he had replaced the O2 sensor and I found the original one in a box labeled "Bosch 15727 WIDEBAND O2 sensor". Could this be the O2 sensor that is currently on the bike? Will the motronic run with a wideband sensor?? I'm trying to figure out what I have before I install the XIED.
    1999 R1100RS after 150 or so other motorcycles including a handful of oilheads and about 30 airheads. When you're old and you go through about 3 bikes a year it adds up quick.

  2. #2
    Registered User roger 04 rt's Avatar
    Join Date
    Oct 2011
    Location
    Florida & Massachusetts
    Posts
    1,926
    Itís a narrow band O2 sensor with a pigtail in place of an oem connector. It should work fine if itís wired correctly.

  3. #3
    thanks. wonder why the box says wideband
    1999 R1100RS after 150 or so other motorcycles including a handful of oilheads and about 30 airheads. When you're old and you go through about 3 bikes a year it adds up quick.

  4. #4
    After lots of reading it appears that this is indeed a universal 4 wire narrow band sensor. Curious that Bosch states wideband on the box. It is available as low as 25 bucks and comes with the "smartlock" connector stuff. Seems like a bargain. I will be removing it and replacing it with a 11 78 1 464 492 / BOSCH that comes with the connector ready to plug into the bike harness. A new sensor is probably not a bad idea when adding the XIED.
    1999 R1100RS after 150 or so other motorcycles including a handful of oilheads and about 30 airheads. When you're old and you go through about 3 bikes a year it adds up quick.

Similar Threads

  1. Bosch Hall Sensor # ?
    By SPIKESBIKE in forum Oilheads
    Replies: 6
    Last Post: 06-17-2015, 06:15 AM
  2. Oxygen sensor for exhaust on 1994 R1100RS
    By aapasquale in forum Oilheads
    Replies: 7
    Last Post: 08-07-2012, 08:27 AM
  3. Clutch sensor/Neutral sensor
    By STOKES73 in forum Oilheads
    Replies: 10
    Last Post: 08-12-2011, 02:45 PM
  4. New Hall sensor only firing one sensor
    By mark from maine in forum Oilheads
    Replies: 4
    Last Post: 05-20-2011, 07:10 PM
  5. BOSCH oil filters
    By PETDOC in forum Oilheads
    Replies: 2
    Last Post: 07-25-2006, 11:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •