Results 1 to 4 of 4

Thread: Skene lights install issue

  1. #1
    Registered User donng's Avatar
    Join Date
    Jan 2019
    Location
    Daytona Beach Fl
    Posts
    8

    Skene lights install issue

    Hello all perhaps someone here has experienced this and can offer a solution

    Iíve installed the P3 lights but thereís an issue with one turn signal

    As set up on the bike both the left and right LED will flash with brakes
    but the right led will not flash with the right turn signal

    The left bike turn signal and led works
    The right side of the bike only the bike turn signal works but not the LED

    Both LEDs do the normal Flickr and both LEDs work with the brake light

    My bike is a 2005 BMW K1200S
    Attached Images Attached Images

  2. #2
    Back in the saddle again mikegalbicka's Avatar
    Join Date
    Aug 2014
    Location
    Lakeland,FL
    Posts
    1,641
    might contact Skene - they have great support
    skenelights-support@skenedesign.com
    Phone Support:
    Mon. - Fri. 9;00am - 5:00 pm Central Time
    (847) 773-1734

  3. #3
    Registered User donng's Avatar
    Join Date
    Jan 2019
    Location
    Daytona Beach Fl
    Posts
    8
    Quote Originally Posted by mikegalbicka View Post
    might contact Skene - they have great support
    skenelights-support@skenedesign.com
    Phone Support:
    Mon. - Fri. 9;00am - 5:00 pm Central Time
    (847) 773-1734
    Agreed they have excellent support
    I received written instructions on what to do and eventually a replacement controller.
    turns out that my install actually had a wire incorrectly chosen ( blue grey vs blue black)
    fantastic support excellent product

  4. #4
    Registered User
    Join Date
    Dec 2018
    Location
    Minneapolis, MN
    Posts
    24
    Your Skene controller is not tapped into the correct wire or the controller has a malfunction. Those are the only two options.

    Check your posi-tap to make sure you have the end with the sharp needle in it poking into the correct wire so that the turn signal wire is actually tapped and not just dented.

Similar Threads

  1. Questions about Skene P3 lights wiring
    By kevinsclo in forum Motorrad
    Replies: 7
    Last Post: 05-31-2018, 04:59 AM
  2. 2009 r1200r skene photon blaster install
    By tater in forum Hexheads/Camheads
    Replies: 14
    Last Post: 05-17-2017, 12:58 AM
  3. Replies: 1
    Last Post: 09-11-2015, 02:54 AM
  4. Skene P3 Lights on a 2014 RT
    By indawin in forum Wetheads
    Replies: 0
    Last Post: 05-22-2014, 03:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •