When I purchased my 2018 R1200RTw I also obtained a GS-911 device. I wanted to be able to see which, if any, fault codes were being generated and then reset them after resolving the issue. I also wanted to be able to reset the service interval setting upon doing the various service steps. The GS-911 allows one to do this. On my bike, the GS-911 communicates with the bike's control systems using the OBD2 connection located near the battery behind the panel aft of the right cylinder.
Info on the GS-911 can be found in the links below -
http://www.beemershop.com/Merchant5...MI8dja9Lex3wIV1wOGCh0JRgwOEAQYASABEgLTAfD_BwE
http://www.beemershop.com/Merchant5/merchant.mvc?Screen=PROD&Product_Code=GS911WIFIOBD2
https://www.hexcode.co.za/
I was interested in learning more about the OBD2 and found this informative video -
<iframe width="560" height="315" src="https://www.youtube.com/embed/GH1315H2SIc" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Info on the GS-911 can be found in the links below -
http://www.beemershop.com/Merchant5...MI8dja9Lex3wIV1wOGCh0JRgwOEAQYASABEgLTAfD_BwE
http://www.beemershop.com/Merchant5/merchant.mvc?Screen=PROD&Product_Code=GS911WIFIOBD2
https://www.hexcode.co.za/
I was interested in learning more about the OBD2 and found this informative video -
<iframe width="560" height="315" src="https://www.youtube.com/embed/GH1315H2SIc" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Last edited: