Results 1 to 4 of 4

Thread: Crash Bars / Anti seize

  1. #1
    Registered User
    Join Date
    Dec 2014
    Location
    Alabama
    Posts
    74

    Crash Bars / Anti seize

    I knew I should have put anti seize on the bolts when I installed the bars a couple of years ago, but I didn't. I did get lucky today and only a little alum. came out on the threads as I took the bolts out. Maybe this will help someone who might be thinking about a set of bars.

  2. #2
    Registered User jandhumphreyme's Avatar
    Join Date
    Sep 2013
    Location
    Central Maine
    Posts
    344
    Good lesson for everyone, thanks for posting. I apply it to everything except lug nuts.
    So often times it happens that we live our lives in chains
    And we never even know we have the key

  3. #3
    Schmails
    Join Date
    Jun 2015
    Location
    Outside Philly, PA
    Posts
    20
    I made the same mistake.
    I have Ztechnik bars on my ‘11 RT, and I have to remove them every time I do plugs, and now when I want to take off my pipes for a recoating.

    I won’t make that mistake again.

    But remember to lower your torque values, because now you are lubricating the bolts/screws. I drop values by 20% (my own engineering estimation).

    —Chris


    Sent from my iPhone using Tapatalk
    =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
    Greetings from the Philadelphia Suburbs.
    '11 R1200RT Ostra Gray

  4. #4
    Registered User
    Join Date
    May 2014
    Location
    Stuart. Fl
    Posts
    47

    Bolts

    There is a product Teff Gel, commonly used on boats where stainless bolts screws ect attach to aluminum.
    I, have used it for years never had a problem with hard to remove bolts screws , and never had one back out.

Similar Threads

  1. Anti-Seize use?
    By garlicbreath in forum Hexheads/Camheads
    Replies: 25
    Last Post: 05-24-2016, 12:59 AM
  2. Anti-seize R75/5 questions
    By jbf in forum Airheads
    Replies: 4
    Last Post: 05-15-2013, 10:59 PM
  3. Plugs anti-seize or not
    By 140008 in forum Airheads
    Replies: 41
    Last Post: 06-27-2012, 01:41 AM
  4. Anti seize
    By georgej in forum Airheads
    Replies: 11
    Last Post: 06-15-2012, 04:52 PM
  5. Anti-seize compound
    By fracture in forum Hexheads/Camheads
    Replies: 11
    Last Post: 08-11-2008, 10:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •