• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

European vs USA version

Would someone tell me the difference between a 1996 R1100RS European and USA versions?

Thanks

One thing is the Euro version does not have a charcoal canister and associated valve and tubing. Also the "cat code plug" (jumper that selects the ECM map from several) is different.
 
I suspect the differences are just emissions (stuff that Paul mentioned) and lighting (reflectors, headlight control, etc.). Country-specific speedometer, of course. On the RS there was a one-piece seat available that I think was mostly a European thing, but I'm not sure if it was all of them. US models tend to get more options than European ones, so you may be more likely to find bikes over there lacking ABS, RID, heated grips and so forth. Things that were technically options here but became pretty standard.
 
I had a Euro/CDN 96 R1100RT. The RT has the same engine as the RS. On that bike the configuration was a yellow cat code plug and a CO trimpot under the left side of the seat. Also there was NO O2 sensor and a factory installed plug cover was installed on the harness plug for the O2 sensor.


I would expect the RS would be the same.
 
Back
Top