Results 1 to 3 of 3

Thread: Cyclops LED for 2010 R1200RT

  1. #1
    Registered User
    Join Date
    Jan 2016

    Cyclops LED for 2010 R1200RT

    I just finished installing 3 new H7 lights on my 2010 R1200RT. Originally the HiBeam was not working, so I figured now would be a good time to replace all 3 with LED.

    I did the install by removing the entire headlight assembly rather that try and struggle reaching with one hand inside the respective access hole. The other reason I removed the headlight assembly was also to replace the disintegrating H7 sockets!

    The new H7 ceramic sockets, I purchased from The H7 sockets used crimp terminals, but since I did not have the required crimping tool for right angle terminals, I ended up soldering the wires onto the crimp terminals.

    When it came to installing the LED's, the process required inserting the LED light into the metallic base and then twisting the light to lock the light onto the metallic base. I found this was very very difficult, so I applied a little bit of di-electric grease onto the bottom of the light shaft, the part that locks to the metallic base. The grease help make twisting the light into metallic base easier.

    Once the light was locked into the base, it was a matter of feeding the wiring and ballast box into the light housing and reinstalling the cover.

    Have not been able to take it for a ride yet, as I am missing parts for the windshield arms.

    Lo BeamLoBeam-sml.jpg

    2010 R1200RT
    Sargent Low Heated Driver Seat
    2007 Burgman 400 - Sold
    Now DFW, TX, used to live - Vancouver, BC

  2. #2
    Registered User drneo66's Avatar
    Join Date
    Jun 2009
    Rochester, MN
    Love it - I'll be upgrading mine over the winter..
    Current: 2007 BMW R1200RT, 2013 F800GS
    Former: 1995 BMW K75S, 2009 BMW G650GS
    MOA Member #:150400, IBA#: 37558

  3. #3
    Registered User
    Join Date
    Oct 2018
    Massillon, Ohio
    I have also recently installed Cyclops LED lights in my 2005 R1200RT. Can the side lights also be replaced with LED's. Will the Canbus be ok with them. I believe the addition is a great safety feature. I think drivers see me better now.

Similar Threads

  1. Cyclops H7 Installation 09 RT
    By will3hawks in forum Hexheads/Camheads
    Replies: 10
    Last Post: 09-10-2017, 01:56 PM
  2. Cyclops H7 Headlight bulb installation 2009 R1200RT
    By will3hawks in forum Hexheads/Camheads
    Replies: 2
    Last Post: 07-30-2017, 02:18 AM
  3. Cyclops LED Bulb Replacement
    By BC1100S in forum Oilheads
    Replies: 15
    Last Post: 05-02-2017, 08:12 PM
  4. Replies: 5
    Last Post: 10-16-2016, 04:35 PM
  5. 2010 r1200rt
    By bullet in forum Hexheads/Camheads
    Replies: 3
    Last Post: 08-25-2011, 05:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts