Results 1 to 2 of 2

Thread: Reconnect ABS modulator R1150RT

  1. #1
    Registered User
    Join Date
    Jun 2014
    Location
    Pocatello, Idaho
    Posts
    12

    Reconnect ABS modulator R1150RT

    Good Afternoon
    I replaced the clutch on a 2004 R1150RT, to do so I removed the ABS modulator.
    As I am replacing this device I've read that I should replace the seals (square-section rings)
    between the brake lines and the pressure modulator...the part number is 34517661. and there's
    a Warning to always fit new spring clips too.
    I get the clips but what does one do with the little seals (also known as Gasket Rings)?
    Thanks for your help.
    Tom Manske

  2. #2
    Registered User
    Join Date
    Jun 2014
    Location
    Pocatello, Idaho
    Posts
    12

    the solution

    There is no purpose for these little squared off o-rings. I left themin the bag.

Similar Threads

  1. ABS modulator
    By paneyes in forum Oilheads
    Replies: 6
    Last Post: 03-10-2011, 03:07 AM
  2. ABS modulator
    By cptchaos in forum Hexheads/Camheads
    Replies: 2
    Last Post: 12-01-2007, 12:32 PM
  3. ABS Modulator
    By Dave_Faria in forum Oilheads
    Replies: 5
    Last Post: 10-22-2007, 11:33 PM
  4. Headlight Modulator
    By paulsibek in forum Gear
    Replies: 17
    Last Post: 05-03-2005, 06:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •