Results 1 to 12 of 12

Thread: 09 K1300 GT safety switch

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    09 K1300 GT safety switch

    Thank goodness these engines shutdown with a loss of oil pressure.
    Be careful of Nicked O rings is all I will say... even after a test ride with no issues.
    The next start up was apparently a gusher as evident by my trail of oil...
    All is good now....apparently all these newer bikes have a safety shutdown to protect the engine. I thought it was toast until talking with a mechanic.
    Last edited by roamingbeemer; 11-09-2017 at 02:15 AM.
    Seek Fun. "Any fool can criticize, condemn and complain--and most fools do" BF
    2009 K1300GT,
    2011 R1200GSA
    2014 Kawasaki DTracker; 2016 Honda NC700 DCT

  2. #2
    Registered User GTRider's Avatar
    Join Date
    Apr 2006
    Location
    Nibley, UT USA
    Posts
    596
    This is on an oil filter, or ?

    Best, DG
    DGerber
    1983 R80ST -- 1988 R100GS "Bee"-- 2004 K1200GT w/Hannigan S/C -- 2010 K1300GT
    BMWMOA#52184, AMA#271542, IBA#138

  3. #3
    O ring for the cam tensioner. Was either bad or was nicked on installation.
    Seek Fun. "Any fool can criticize, condemn and complain--and most fools do" BF
    2009 K1300GT,
    2011 R1200GSA
    2014 Kawasaki DTracker; 2016 Honda NC700 DCT

  4. #4
    Debbie's Servant Lee's Avatar
    Join Date
    May 2003
    Location
    SW Iowa
    Posts
    4,119
    Quote Originally Posted by roamingbeemer View Post
    Thank goodness these engines shutdown with a loss of oil pressure.
    Be careful of Nicked O rings is all I will say... even after a test ride with no issues.
    The next start up was apparently a gusher as evident by my trail of oil...
    All is good now....apparently all these newer bikes have a safety shutdown to protect the engine. I thought it was toast until talking with a mechanic.
    Never heard of of a switch shutting down the bike when it's low on oil.
    How much oil did you loose because of the nick in the cam chain tensioner o-ring?
    Lee
    2016 R1200RS
    MOA # 30878
    Past BMW Bikes: 2011 K1300S, 2003 K1200RS, 1991 K75S, 1987 K75T, 1984 R100RT

  5. #5
    Left Coast Rider
    Join Date
    Nov 2011
    Location
    Vancouver, British Columbia, Canada
    Posts
    2,540
    Quote Originally Posted by Lee View Post
    Never heard of of a switch shutting down the bike when it's low on oil.
    Me neither. Must have some sophistication other than low oil pressure otherwise the bike wouldn't start - due to low oil pressure. If it does in fact exist, perhaps it operates similar to the headlight; doesn't activate until the bike has started.

  6. #6
    It was a gusher as evident by my trail. The remaining oil was Nil to none.
    The mechanics at the dealer were pretty confident in this knowledge of a shutdown feature and had other examples to back it up.
    Seek Fun. "Any fool can criticize, condemn and complain--and most fools do" BF
    2009 K1300GT,
    2011 R1200GSA
    2014 Kawasaki DTracker; 2016 Honda NC700 DCT

  7. #7
    Not sure what would have happened if the final oil leaked out at 8000 rpm. All I can relay is what happened to me at idle when red lights came on and the bike almost immediately stopped running. I got to the shoulder and waited to get picked up.
    After finding the O ring problem they put fresh oil in and it fired right up without a hitch. They were very confident the bike had shut off as designed.

    Although they were mortified by what happened. No leaks during their test ride.
    Last edited by roamingbeemer; 11-10-2017 at 02:52 PM.
    Seek Fun. "Any fool can criticize, condemn and complain--and most fools do" BF
    2009 K1300GT,
    2011 R1200GSA
    2014 Kawasaki DTracker; 2016 Honda NC700 DCT

  8. #8
    Debbie's Servant Lee's Avatar
    Join Date
    May 2003
    Location
    SW Iowa
    Posts
    4,119
    Quote Originally Posted by roamingbeemer View Post
    All I can relay is what happened to me at idle when red lights came on and the bike almost immediately stopped running. .
    Make me wonder if the engine started to seize?
    Lee
    2016 R1200RS
    MOA # 30878
    Past BMW Bikes: 2011 K1300S, 2003 K1200RS, 1991 K75S, 1987 K75T, 1984 R100RT

  9. #9
    Quote Originally Posted by roamingbeemer View Post
    It was a gusher as evident by my trail. The remaining oil was Nil to none.
    The mechanics at the dealer were pretty confident in this knowledge of a shutdown feature and had other examples to back it up.
    Did this happen to be a multi-line dealership? I remember one mechanic swearing up and down to me that my K100 had a tip-over sensor that killed the engine at 30 degrees of bank.
    Paul Glaves - "Big Bend", Texas U.S.A
    "The greatest challenge to any thinker is stating the problem in a way that will allow a solution." - Bertrand Russell
    http://web.bigbend.net/~glaves/

  10. #10
    Quote Originally Posted by PGlaves View Post
    Did this happen to be a multi-line dealership? I remember one mechanic swearing up and down to me that my K100 had a tip-over sensor that killed the engine at 30 degrees of bank.
    No multi brand dealer. Long term BMW dealer with Mechanics going back to the 1100s. It certainly seemed to work the way they described with the bike shutting off immediately after the red oil pressure light came on. I would expect it to run a little longer before seizing (especially at idle)
    They talked about examples of R bikes losing all their oil after idling all day and they start right up after fixing the seals etc.
    Seek Fun. "Any fool can criticize, condemn and complain--and most fools do" BF
    2009 K1300GT,
    2011 R1200GSA
    2014 Kawasaki DTracker; 2016 Honda NC700 DCT

Similar Threads

  1. Safety clutch switch on r1200gs
    By Striper55 in forum Hexheads/Camheads
    Replies: 2
    Last Post: 07-05-2012, 12:50 PM
  2. k1300 s and r
    By roadcrave in forum Wedge K-bikes
    Replies: 18
    Last Post: 04-03-2010, 01:05 PM
  3. New K1300 GT
    By TIMRFO in forum Wedge K-bikes
    Replies: 15
    Last Post: 05-28-2009, 10:43 PM
  4. Sidestand Safety Switch
    By thompsonr in forum Oilheads
    Replies: 23
    Last Post: 01-19-2009, 02:39 PM
  5. neutral safety switch
    By DFNTON in forum Oilheads
    Replies: 6
    Last Post: 10-05-2007, 12:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •