Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Have you had your bikes software updated lately?
The reason I ask is mine was recently updated and I got big noise now on my Sena SMH10B. Thing is I am not sure if it is the update to the bike for sure, but Sena to Sena is crystal clear on intercom. As soon as I go over to my memory stick and Bluetooth of the bike I got static/noise.
I have noticed this since my bike was updated a week or two ago for the first time since 2015.
Well I thought I had this beat but no not to be.
Went out yesterday and for the first few hours it was clear. Then a stop for lunch and it went to static again.
I did restore the firmware to the Sena SHM10 that worked before and all seemed well.
So I realized I went into breakfast and left it on. I also went into lunch and left it on. So the logic to me is the battery in the Sena may be toast and once it gets weak it starts with the static.
Did a search and found a guy who replaced the Sena battery and so I have ordered one to see. Amazon has one for 11.98 and it will be here Wednesday.
I will install and charge it and see if that is the issue. I had bought a dual pack and since they both do it it may be after 7 or 8 years they need a new battery?
If not then time to try a new unit,and if there is static I would think it points to the bike and maybe the update I got a few weeks ago.
I did check with the GS-911 and no codes in the bike so again I will see what is what after battery replacement.
Anyone else ever have static issues with Bluetooth on a RT?