BMARC153920
New member
I have this cross posted on the K16 forum but for a wider audience I'd like to ask here.
About 10k miles ago I noticed an ever so slight pulse under light breaking that would end in a sort of judder the last few feet of a stop. Heavy breaking this was less noticable.
I thought at 15k maybe the front pads we're going off, they were about 60 percent worn so I replaced the pads.
This helped, but the problem quickly returned and is getting worse, mainly the last few feet of a stop there is a clear judder almost a grinding feeling.
Rotors are smooth and it's not the rear since stops with just the rear brake are smooth.
My feeling is a slightly bent rotor, just looking for opinions.
I did lift the front wheel and there is no binding, I do not however have a way to measure run out.
Sent from my Pixel using Tapatalk
About 10k miles ago I noticed an ever so slight pulse under light breaking that would end in a sort of judder the last few feet of a stop. Heavy breaking this was less noticable.
I thought at 15k maybe the front pads we're going off, they were about 60 percent worn so I replaced the pads.
This helped, but the problem quickly returned and is getting worse, mainly the last few feet of a stop there is a clear judder almost a grinding feeling.
Rotors are smooth and it's not the rear since stops with just the rear brake are smooth.
My feeling is a slightly bent rotor, just looking for opinions.
I did lift the front wheel and there is no binding, I do not however have a way to measure run out.
Sent from my Pixel using Tapatalk