Results 1 to 3 of 3

Thread: Would like free 2.5mm valve shim

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User rall275's Avatar
    Join Date
    Apr 2017
    Location
    Harrisburg, IL
    Posts
    67

    Would like free 2.5mm valve shim

    Maybe I'm too bold to ask, but I'm doing a valve adjustment on my '88 K75C. Fuel mileage was about 35.5mpg, and so I'm going through procedures that might rectify this. Bike has relatively low miles, but who knows what the PO did?

    I used the Lively tools and they work great. Front exhaust valve is tight with .216mm clearance. Middle exhaust valve is tight with .229mm clearance. Front had a 2.6mm shim, middle had a 2.55mm shim. The front needs a 2.55mm shim to get a .266mm gap, so I'll reuse the middle's for this. The middle needs a 2.5 to get the gap at .279.

    At Bob's, a 2.5 shim is over $13 with $10 shipping.

    Does anyone have a 2.5mm shim they could send me? Between cardboard taped in an envelope would be a postage stamp.

    Sorry for begging, but can you see what you could do for me?

    Thanks al!

  2. #2
    Registered User
    Join Date
    Mar 2008
    Location
    Belton Tx
    Posts
    703
    I have one you can have. I think I will have to put it in a package that is about $4.50 prepaid. Let me know.
    Ron

    91 K75RT ABS

  3. #3
    Registered User drneo66's Avatar
    Join Date
    Jun 2009
    Location
    Rochester, MN
    Posts
    577
    I don't have one that size, but I have sold quite a few extras on ebay over the years - I just tape them to a piece of thin cardboard and put them in a regular mail envelope. They weight less than an ounce so they qualify for 1st class mailing. However, the first time I sent one, I went to the post office and the lady told me there was an extra (23 cent?) charge for not having a flat envelope. From then on, I just put a 2nd stamp on the envelope and they have all found their new homes without problem.

    Also, some dealers will trade out one shim for another.

    Good luck!
    Current: 2007 BMW R1200RT, 2013 F800GS
    Former: 1995 BMW K75S, 2009 BMW G650GS
    MOA Member #:150400, IBA#: 37558

Similar Threads

  1. 09 R1200RT Valve shim Q
    By duer in forum Hexheads/Camheads
    Replies: 5
    Last Post: 05-24-2016, 12:39 AM
  2. 2V - Valve Shim Thickness - Printed vs. Actual (95 K75S)
    By drneo66 in forum Flying Brick K-bikes
    Replies: 24
    Last Post: 07-11-2015, 12:54 AM
  3. to shim a rocker or not
    By KARSTEN in forum Airheads
    Replies: 2
    Last Post: 03-26-2009, 01:30 AM
  4. Valve Shim Adjustment Interval
    By 37071 in forum Flying Brick K-bikes
    Replies: 3
    Last Post: 10-30-2008, 11:55 AM
  5. Replies: 1
    Last Post: 06-01-2007, 03:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •