Cell Phone Mount - Trying To Find Company that Offers iPhone 6+/Obox Defender Mount

[boltgunner]

I thought I found the thread at one point, but it was the wrong thread, and I know there's a company out there that offers a mount that secures an iPhone 6 Plus with an OtterBox Defender case.

Can anybody steer me in the right direction? thank you!!!

[jagarra]

Here is one with a handlebar mount.

https://www.encased.com/products/bik...oXcBoCCkPw_wcB

[PatrickMJoyce]

I use a Ram mount X-Grip on both my RT and GS for my iPhone 6+ in a Defender case. Ordered them from Revzilla since they carry the complete line of these products. I've never had a phone come off these mounts in 30K+ miles. Mounted the RT with a fork stem kit and used a handle bar kit on the tubes for the GS. It's also easy to put your phone in a zip lock bag for rain conditions.

[RBEmerson]

+1 - RAM-Mount X holder with a routine Otter Box is the way to go.

[saylorspond]

Another good option is SlipGrip: http://www.slipgripcarmounts.com/

[dughuze]

I have a 2012 K1600GTL and a Samsung S8+ with the Otterbox case. I bought a ball mount that has a mounting hole for a bolt. I removed the bolt holding the dashboard together just above the left speaker and replaced the bolt with a longer version to make up for the thickness of the ball mount. I also added some stainless washers below to make up for the fact that the screw is recessed. This has worked flawlessly for me. I do suggest blue locktite on the bolt as it will vibrate lose. If I am not clear I can take a pic for you and post it.

[greenwald]

Take a look at the KLOCK WERKS Device Mount.

Access their website for pics and details.

Mounted it on my bike for product review testing last month, as I wrote an article on it for another motorcycle magazine.

Could hold cell phones, GPS, I-Pass, coin dispenser, etc.

Neat concept!

[sdpc2]

+1 and so far, it works great. Pandora, I-Music, GPS, Phone calls all through my Sena into my helmet.

I use a Ram mount X-Grip on both my RT and GS for my iPhone 6+ in a Defender case. Ordered them from Revzilla since they carry the complete line of these products. I've never had a phone come off these mounts in 30K+ miles. Mounted the RT with a fork stem kit and used a handle bar kit on the tubes for the GS. It's also easy to put your phone in a zip lock bag for rain conditions.

[bhackleman]

I thought I found the thread at one point, but it was the wrong thread, and I know there's a company out there that offers a mount that secures an iPhone 6 Plus with an OtterBox Defender case.

Can anybody steer me in the right direction? thank you!!!

I don't know 6plus dimensions, but have you checked out the ram mount aqua box? Before phones got so big, I was using a smaller one. They make an extra large one RAM-HOL-AQ6U that probably could be used with some filler material to keep phone pressed against the front to enable touch screen functionality while in the case