BMW Triumphant
Ed Kilner #176066
From the Skene website, the description of their dimmer (a PWM unit) has the following info on LED light compatibility. This is the first such site I have seen and the info below is priceless! Lamps that will work with the IQ-275 ought to work with the ezCAN, although there are no guarantees being offered by me or Skene...
IQ-275 Intelligent Lighting Controller (smart dimmer)
Installation is quick and easy, and the controller can be used with almost any motorcycle.
A comprehensive installation guide and all necessary connectors are included.
Note 1: The 2014+ BMW R1200GS with LED headlight option provides no access to the high beam wire, so a separate switch is required to select high beam override and to program the unit. The model with incandescent headlights works normally.
Note 2: Some LEDs have 3 wires rather than 2, where the third wire is a dimmer input. These include :
Denali dual-intensity DX and D2 models
Cyclops Optimus
VisionX Optimus
These lights require a slightly different wiring method and shown here: 3-wire LED
Note 3: While the great majority of aftermarket LED lights can be used with the IQ-275, a few are designed such that they will not operate properly with a dimmer. These include:
Rigid Industries D Series Lamps (D2 and Dually) and SR models. Models manufactured after 7/2013 are no longer able to support the IQ-275 or any other dimmer due to a design change. Other Rigid LEDs work with our controller.
KTM 990 Supermoto Auxiliary LED Light Kit, part number: 62014910033.
Denali D4: While early Denali D4 LED's were fully compatible with the IQ-175 & IQ-275, the current model of this lamp is no longer able to support the IQ-275 or any other dimmer due to a design change. Other Denali LEDs work with our controller.
If anyone finds similar info on other sites, please do advise us all.
IQ-275 Intelligent Lighting Controller (smart dimmer)
Installation is quick and easy, and the controller can be used with almost any motorcycle.
A comprehensive installation guide and all necessary connectors are included.
Note 1: The 2014+ BMW R1200GS with LED headlight option provides no access to the high beam wire, so a separate switch is required to select high beam override and to program the unit. The model with incandescent headlights works normally.
Note 2: Some LEDs have 3 wires rather than 2, where the third wire is a dimmer input. These include :
Denali dual-intensity DX and D2 models
Cyclops Optimus
VisionX Optimus
These lights require a slightly different wiring method and shown here: 3-wire LED
Note 3: While the great majority of aftermarket LED lights can be used with the IQ-275, a few are designed such that they will not operate properly with a dimmer. These include:
Rigid Industries D Series Lamps (D2 and Dually) and SR models. Models manufactured after 7/2013 are no longer able to support the IQ-275 or any other dimmer due to a design change. Other Rigid LEDs work with our controller.
KTM 990 Supermoto Auxiliary LED Light Kit, part number: 62014910033.
Denali D4: While early Denali D4 LED's were fully compatible with the IQ-175 & IQ-275, the current model of this lamp is no longer able to support the IQ-275 or any other dimmer due to a design change. Other Denali LEDs work with our controller.
If anyone finds similar info on other sites, please do advise us all.