Results 1 to 11 of 11

Thread: GS vs RT Riding position

  1. #1
    Registered User skibumwi's Avatar
    Join Date
    Jul 2016
    Location
    Milwaukee
    Posts
    196

    GS vs RT Riding position

    All,

    I've purchased a '16 R1200RT but am having quite a bit of back, knee, and hip pain. I've posted a different tread discussing the peg-lowering and seat-raising options that I', exploring but I'm also thinking that I may just need to admit that the RT might not have been the correct choice for me.

    Can anyone provide me with a comparison of the riding positions between the GS and the RT? Is the Peg-to-seat height the same? Is the tank any narrower where my knees would be? Are the pegs set any further forward or back between the two bikes? What about the handlebar positioning?

    I know I'd be sitting higher, I'd just like to understand if there are any positional differences.

    Thanks,
    Ski

  2. #2
    Registered User BMARC153920's Avatar
    Join Date
    Dec 2014
    Location
    Orange County, NY
    Posts
    623
    I had the same issues and ended up having to install risers and peg lowering blocks. The GS I only rode once iirc it was much more upright, narrow in the knees and feet felt about the same.

  3. #3
    Registered User
    Join Date
    Sep 2007
    Location
    So. Calif.
    Posts
    420
    Based on a showroom test sit, the RT's "ergo triangle" is very much more compact than a GS's. That is, the peg to seat distance is noticeably shorter on the RT, and the rider leans farther forward. Of course that "triangle" is closer to the ground too, but I understand that's not your question. Another spec that might affect back/neck/shoulder comfort is the width of the handlebar - hands far apart while sitting upright seems more comfortable to me. (I've always wondered, but never really checked into it, whether the bars could be safely rotated a little to provide a different shoulder feel).
    '17 R1200GS.
    Priors: '16 R1200R, '14 R1200GS, '13 K1600GT, '08 R1200RT, '04 R1150RT, '05 R1200GS, '73 R75/5 (LWB).

  4. #4
    Registered User lkraus's Avatar
    Join Date
    Nov 2011
    Location
    Central Ohio
    Posts
    1,212
    Quote Originally Posted by skibumwi View Post
    Can anyone provide me with a comparison of the riding positions between the GS and the RT? Is the Peg-to-seat height the same? Is the tank any narrower where my knees would be? Are the pegs set any further forward or back between the two bikes? What about the handlebar positioning?
    http://cycle-ergo.com/ is designed to help answer these types of questions. Be sure to expand and adjust the options on the right side.
    Larry
    2006 R1200RT

  5. #5
    Registered User skibumwi's Avatar
    Join Date
    Jul 2016
    Location
    Milwaukee
    Posts
    196
    Quote Originally Posted by lkraus View Post
    http://cycle-ergo.com/ is designed to help answer these types of questions. Be sure to expand and adjust the options on the right side.
    Very cool site, thanks

    Ski

  6. #6
    Larry: Thanks for posting that link. It was very helpful....

  7. #7
    Dress for fall & avoid it AlanColes's Avatar
    Join Date
    Aug 2013
    Location
    Bedford, Nova Scotia
    Posts
    689
    One thing that many folks forget when comparing the RT to the GS is that if you typically have your RT seat set to the low position (like me for my 30" inseam) than simply setting it to the high position changes the ergonomics some. You still won't be sitting as high as on a GS, nor will the angles be as "relaxed", but that is, to some degree, the difference between the ergonomics for a Sport-Touring bike and a Dual-Sport/Adventure bike. I've done 600-700 mile days on both and the RT provides far more wind, weather and nosie protection while the GS has a more laid-back/upright position. For me, for touring, the RT adjusted to your specific ergo needs can't be beat.
    Regards, Alan - President BMWONS - MOA Charter Club #097, BMWMOA/BMWRA/BMWONS/Airheads
    Current: '14 R1200RT / '06 Ducati ST3s / '91 R100GS / '86 R80RT / '75 R90S / '73 850 & '70 750 Commando Prev: '04 R1150RT / '81 Honda GL1100 / '77 Suzuki GS750 / '73 Norton 850 Commando

  8. #8
    Quote Originally Posted by AlanColes View Post
    One thing that many folks forget when comparing the RT to the GS is that if you typically have your RT seat set to the low position (like me for my 30" inseam) than simply setting it to the high position changes the ergonomics some. You still won't be sitting as high as on a GS, nor will the angles be as "relaxed", but that is, to some degree, the difference between the ergonomics for a Sport-Touring bike and a Dual-Sport/Adventure bike. I've done 600-700 mile days on both and the RT provides far more wind, weather and nosie protection while the GS has a more laid-back/upright position. For me, for touring, the RT adjusted to your specific ergo needs can't be beat.
    I have the high seat option in the high position that that gets me close enough to ideal ergos for someone 6'4" tall w/ 35" inseam for all day comfort on an RTLC. This is the magic in this bike: it is excellent as a tourer and brings in enough sport prowess to make any kind of pavement a total joy on this bike. Can't imagine a better true all-arounder, one-bike solution, for any type of pavement.

  9. #9
    Registered User gregcrna's Avatar
    Join Date
    Jun 2012
    Location
    Grand Rapids, MI
    Posts
    20
    Quote Originally Posted by skibumwi View Post
    All,

    I've purchased a '16 R1200RT but am having quite a bit of back, knee, and hip pain. I've posted a different tread discussing the peg-lowering and seat-raising options that I', exploring but I'm also thinking that I may just need to admit that the RT might not have been the correct choice for me.

    Can anyone provide me with a comparison of the riding positions between the GS and the RT? Is the Peg-to-seat height the same? Is the tank any narrower where my knees would be? Are the pegs set any further forward or back between the two bikes? What about the handlebar positioning?

    I know I'd be sitting higher, I'd just like to understand if there are any positional differences.

    Thanks,
    Ski
    I can’t fit my legs in the tank “cutout” on the RT. I’m 6’5” w/ a 36–37” inseam. I have a GSA. LOVE the handling of the RT. BUT, doesn’t fit my frame.


    Sent from my iPhone using Tapatalk

  10. #10
    I am 6'2" w/34 inch inseam. I added Ilium Works bar risers to my '14 RT. That made a world of difference in my long distance comfort because it caused me to straighten my back and have less of a reach to the bars.

    The best ergos I ever experienced--for my body---was my 2004 1150 GSA. Damn, I wish I had held onto that bike.

  11. #11
    I have had 3 RT's 2007,2010,2014. I had the bad shock and used the opportunity to get a 2014 GSA. To me the RT was more compact position and the GSA is a little more roomy. I did put bar risers on the GSA. I do not think I will go back the RT. I am 6'1" 34 inseam. I can sit flat footed but not by much. I think you would fair better on a GSA, I can not comment on a standard GS as I have not owned one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •