Results 1 to 8 of 8

Thread: K75 Fork gaiters?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User TOM1911's Avatar
    Join Date
    Mar 2007
    Location
    Middleburg Fl.
    Posts
    29

    K75 Fork gaiters?

    I've been trying to find a set of gaiters for the K75 that has finally worn out the springs, seals and dust boots that were original to the bike. Ihave seen in other posts that Rancho Suspension makes a nice set of gaiters but i have not been able to find a part number or a supplier for these items. I,m rebuilding the forks and I live in a sandy and dusty environment and gaiters sound like they would help extend the life of the fork seals. Any help would be greatly appreciated.
    2016 R1200RS

  2. #2
    A bozo on the bus deilenberger's Avatar
    Join Date
    Mar 2003
    Location
    Spring Lake NJ, USA
    Posts
    8,557
    Tom,

    Google turns up http://www.gorancho.com/home.php

    I don't have the specific model ##.. but http://www.gorancho.com/products/acc...ccessories.php lists some in lots of colors..

    These weren't made for "forks" - the ones that were on my K75S were shock absorber boots - probably the black ones shown on that page.
    Don Eilenberger http://www.eilenberger.net
    Spring Lk Heights NJ NJ Shore BMW Riders
    '12 R1200R - I love this bike!

  3. #3
    Tom,
    I agree with Don...those Rancho boots fit the K like a glove and are cheap!

    Hit their website and find their local supplier...
    Edde
    93 K75s
    www.motoedde.com

  4. #4
    Blocking the slow lane
    Join Date
    Mar 2003
    Location
    Edwardsville, IL
    Posts
    1,852
    I use the classic /5 fork boot on my K75. The ladies dig it.
    Jon Diaz
    BMW K75
    BMWMOA Ambassador

  5. #5
    Registered User TOM1911's Avatar
    Join Date
    Mar 2007
    Location
    Middleburg Fl.
    Posts
    29
    Thanks Don.. Just ordered a set of Rancho RS1952 thru Summit Racing. Should do the job admirably
    2016 R1200RS

  6. #6
    I wanted the accordion fork boots on my 92 K75S. I went to Re-Psycle BMW and obtained the boots. A set of K75S fork lowers and fork tubes were used to make certain that the boots would fit. The part number for the fork boots (which fit perfectly) is 31-42-2-311-077. I used some old clamps of the appropriate size to secure the boots to the forks.

    I had some issues with extracting the fork tubes from the triple clamps. I used a good bit of heat from a propane torch on the lower and upper clamp (after removing pinch bolts!). The fork tubes slid out after heating.

    Although I cleaned the inner surface of the upper and lower clamps with scotchbrite, it was necessary to use heat to allow the fork tubes to be inserted.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •