prairieguy
New member
As part of the "nudification" of the RT, I'm removing the oil cooler. I have a part number for a non-cooled oil filter cover - 11 42 1 263 345. But, no one has been able to tell me if this is the right cover for my purposes. I already have ordered the correct pipe that goes inside.
I also have a question about wrapping the wiring harness. The previous owner(s) used an enthusiastic amount of electrical tape, and I didn't like the stiffness of the harness as I turned the bars. I've removed a great deal of it to clean things up and check the condition of the wiring, and now I'd like to wrap it up properly. I'm aware that there are different options for automotive purposes, but I don't think they're good for a bike. The harness is flexed quite a bit at the steering junction, so I really want the right protection on my harness.
I also have a question about wrapping the wiring harness. The previous owner(s) used an enthusiastic amount of electrical tape, and I didn't like the stiffness of the harness as I turned the bars. I've removed a great deal of it to clean things up and check the condition of the wiring, and now I'd like to wrap it up properly. I'm aware that there are different options for automotive purposes, but I don't think they're good for a bike. The harness is flexed quite a bit at the steering junction, so I really want the right protection on my harness.