Results 1 to 1 of 1

Thread: Remove/Install K75S Engine Spoiler EASILY

  1. #1
    3 Red Bricks
    Join Date
    Jan 2007
    Location
    Pleasanton, Ca.
    Posts
    5,219

    Remove/Install K75S Engine Spoiler EASILY

    The easiest way to remove/install the belly pan is to first back off the two bolts that hold the rear mount (tongue) about 1/2" or just before they fall out.

    Without doing that, you're having to align three solidly mounted things (the top of the pan above the grill, the lower rubber mounts, and the rear tongue mount) which almost always ends up with the top of the pan hitting the radiator cover before the lower mounts can engage.

    With the rear mount loose, you can engage the rear and have much more flexibility to lower the rear to get the top in place while engageing the lower mounts. No more having to force anything or hold your tongue just right. Easy Peasy.

    If you still have difficulties replacing the fairing, completely remove the tongue until the forward rubbers are engaged and those bolts started. Then install the tongue and its bolts.





    Last edited by 98lee; 05-13-2021 at 07:45 PM. Reason: Sp.
    LONG MAY YOUR BRICK FLY!

    Ride Safe, Ride Far, Ride Often

    Lee Fulton Forum Moderator
    3 Marakesh Red K75Ss
    Mine, Hers, Spare

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •