• Welcome Guest! If you are already a member of the BMW MOA, please log in to the forum in the upper right hand corner of this page. Check "Remember Me?" if you wish to stay logged in.

    We hope you enjoy the excellent technical knowledge, event information and discussions that the BMWMOA forum provides. Why not take the time to join the club, so you can enjoy posting on the forum, the club magazine, and all of the discounts and benefits the BMWMOA offers?

    Want to read the MOA monthly magazine for free? Take a 3-month test ride of the magazine; check here for details.

  • NOTE. Some content will be hidden from you. If you want to view all content, you must register for the forum if you are not a member, or if a member, you must be logged in.

Remove/Install K75S Engine Spoiler EASILY

98lee

3 Red Bricks
Staff member
The easiest way to remove/install the belly pan is to first back off the two bolts that hold the rear mount (tongue) about 1/2" or just before they fall out.

Without doing that, you're having to align three solidly mounted things (the top of the pan above the grill, the lower rubber mounts, and the rear tongue mount) which almost always ends up with the top of the pan hitting the radiator cover before the lower mounts can engage.

With the rear mount loose, you can engage the rear and have much more flexibility to lower the rear to get the top in place while engageing the lower mounts. No more having to force anything or hold your tongue just right. Easy Peasy. :thumb

If you still have difficulties replacing the fairing, completely remove the tongue until the forward rubbers are engaged and those bolts started. Then install the tongue and its bolts.





:dance:dance:dance
 
Last edited:
Back
Top