-
Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password. If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?
-
Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.
The Election forum is here: Election Forum
/5 front turn signal wiring
- Thread starter kjmcd13
- Start date
1074
Active member
Just so you know, the left wire is blue with a red trace and goes to the reflector assembly post that touches the center of the bulb. The whole thing grounds out through the aluminum housing and through the forks. The right wire is blue with a black trace.
Both wires in this harness go to the terminal junction block inside the headlight. There are four wires at each terminal. One to the front signal, one to the rear signal, one to one side of the indicator light and one to the t/s switch.
Both wires in this harness go to the terminal junction block inside the headlight. There are four wires at each terminal. One to the front signal, one to the rear signal, one to one side of the indicator light and one to the t/s switch.
