RANBUSH
Ran Bush
'92 R100 GS. I was on a ride the other day, and at a stop the guy behind me told me my brake light wasn't lighting up in any of the turns. Today I take a look and find that the front brake switch seems to have stopped working. Stepping on the rear brake pedal lights the brake light, but pulling on the front brake lever doesn't light the brake light.
I took the lever apart, cleaned and greased the housing and the pivot bolt, disconnected the cable/switch, squirted some contact cleaner in the switch, pushed the switch in a few times, still didn't light the brake light. Put it back together. No joy.
The picture of the switch at the Max BMW parts fiche seems to show the switch plunger on a new part may be a little longer than the plunger on my switch. The new cable switch is about $38, but I'd like to fix this one if I could. Do the switches get tired and die after twenty years or so?
Any input appreciated. Thanks.
I took the lever apart, cleaned and greased the housing and the pivot bolt, disconnected the cable/switch, squirted some contact cleaner in the switch, pushed the switch in a few times, still didn't light the brake light. Put it back together. No joy.
The picture of the switch at the Max BMW parts fiche seems to show the switch plunger on a new part may be a little longer than the plunger on my switch. The new cable switch is about $38, but I'd like to fix this one if I could. Do the switches get tired and die after twenty years or so?
Any input appreciated. Thanks.