• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

Removing lock - Integral Cases

1der

New member
The latch on my "94" K1100LT side case broke and I have the replacement latch. How do you remove and replace the lock? Tried a search with no luck.
 
1der,

I added "Integral Cases" to your title to be more specific.



"A picture is worth a thousand words" so here are four thousand words plus a few:


Here is your lock cylinder with the retaining tab protruding. This is what you must push back flush with the cylinder to remove the lock cylinder.

lock1.jpg



This is the latch in the open position.

lock2.jpg



This is where the retaining tab ends up with the cylinder inserted.

lock3.jpg





:dance:dance:dance
 
This is with the cylinder inserted showing the retaining tab in place. Push the tab in, pull on the key to remove cylinder. Some rotation helps.


lock4.jpg



To install cylinder, with key in the cylinder, push into the latch rotating counterclockwise until it is seated and stops rotating.





:dance:dance:dance
 
I was able to remove the lock assembly by pushing in the end detent spring on the end of lock. But now I'm unable to reinsert the lock assembly due to the spring not letting it in all the way. And to top it off my computer has a bug and unable to do much on it. Computer going into the shop Monday. Thanks for the help.
PS it's the R side case latch on the K1100LT
 
The latch hole has four slots. Start the lock cylinder with the locking tab in the slot that is at 3 o'clock. Push all the way in then rotate counterclockwise until it stops.



Trip computer? FI computer? What's it doing/not doing?

(I reread your post. If your talking home computer, we can't help you here. We all can barely post, email, and use ebay).



:dance:dance:dance
 
98lee,
Thanks...... Yes, pictures worth 4 thousands words. With the help of pictures AND a liberal amount of grease, along with a COUNTERclockwise rotation, lock cylinder popped into place. I'm good to go.
10-4 on (home) computer knowledge. In my case, lack of.
 
Back
Top