Results 1 to 3 of 3

Thread: 49L Top Case Lid disassembly

  1. #1

    49L Top Case Lid disassembly

    Hello and thank you in advance.

    I purchased a top case where the previous owner had cut off the 4 latches attached to the lid off the case. I've removed every torx screw in the top lid assembly but cannot figure out how to separate the inner black plastic from the outer shell. I've taken the lid to Bob's BMW and they were no help.

    My plan is to fabricate new latches unless someone has a better idea.

  2. #2
    Liaison 20774's Avatar
    Join Date
    Sep 2005
    San Antonio, TX
    Welcome to the forum! Not sure if either of this will help, but something to check out anyway:

    There's mention of inner/outer cases.
    Kurt -- Forum Liaison ---> Resources and Links Thread <---
    '78 R100/7 & '69 R69S & '52 R25/2
    mine-ineye-deatheah-pielayah-jooa-kalayus. oolah-minane-hay-meeriah-kal-oyus-algay-a-thaykin', buddy!

  3. #3
    Registered User
    Join Date
    Aug 2018
    Fargo, ND
    If you have the seat pad off and all the screws out it should just about fall apart. You have missed something!
    From the only real Fargo, ND!

Similar Threads

  1. 28L Top Case Disassembly Help - To Remove Lock Cylinder
    By ItsPhilD in forum Hexheads/Camheads
    Replies: 19
    Last Post: 06-25-2020, 01:58 AM
  2. Help!!! Headlight disassembly for a 16 rt
    By poco183 in forum Wetheads
    Replies: 5
    Last Post: 12-29-2018, 01:27 AM
  3. Top case Disassembly 05-13 R1200RT
    By in forum Hexheads/Camheads
    Replies: 2
    Last Post: 01-27-2018, 02:28 AM
  4. 2009 RT -- Side Case Disassembly and Paint
    By tmwilmotte in forum Hexheads/Camheads
    Replies: 1
    Last Post: 01-06-2014, 03:26 AM
  5. FYKRT - gas cap disassembly
    By mneblett in forum Flying Brick K-bikes
    Replies: 2
    Last Post: 12-12-2010, 01:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts