Recently I have lubed the rear splines during a tire change. The tire was balanced( and rechecked) but there is what appears to be a driveline vibration. I do not see any indexing marks on the rear u joint to the final drive spline although there are some marks mixed in with the numbers on the Final drive spline. Do these two need to be indexed? Haynes manual says save original position But when the boot came apart so were the splines. Any help would be greatly appreciated. Thanks
-
Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password. If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?
-
Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.
The Election forum is here: Election Forum
R1200 GSA final drive to Rear u joint
- Thread starter 146373
- Start date
Welcome to the forum! This area of the forum is used to introduce yourself and your bike. Typically, when you have a mechanical problem or want to ask for some help, you should find the specific forum area that pertains to your bike. I have made a copy of your post and put it into the Hexhead/Camhead forum. You can click on the link below to find your post.
http://forums.bmwmoa.org/showthread.php?72350-R1200-GSA-final-drive-to-Rear-u-joint
In a few days, once you have some help or input in the other forum, I will come back and delete this thread.
Good luck!
http://forums.bmwmoa.org/showthread.php?72350-R1200-GSA-final-drive-to-Rear-u-joint
In a few days, once you have some help or input in the other forum, I will come back and delete this thread.
Good luck!
