Results 1 to 7 of 7

Thread: K1600GTL CB, Fuse Block/PDM60

  1. #1
    "Jack" jacko's Avatar
    Join Date
    May 2006
    Location
    "Jackass Hollow" Arvada, Colorado
    Posts
    308

    K1600GTL CB, Fuse Block/PDM60

    Thinking about adding a CB (probably J&M) any hang ups or problems during the installation? Also with very little room under the seat (compared to the 2011RT) where did you place the fuse block/PDM60.
    Jack Watson
    BMWMOA #125089
    2014 K1600GTL
    2013 C650GT

  2. #2
    Registered User billspurgeon's Avatar
    Join Date
    Apr 2003
    Location
    Phoenix, AZ
    Posts
    34
    Quote Originally Posted by jacko View Post
    Thinking about adding a CB (probably J&M) any hang ups or problems during the installation? Also with very little room under the seat (compared to the 2011RT) where did you place the fuse block/PDM60.
    I installed the Fuse Block under the right side panel next to the seat. I used Velcro to hold it in place. When the panel is reinstalled, you don't know it is there.
    DSC00106.JPG

    Bill

  3. #3
    Biker gunnert's Avatar
    Join Date
    May 2008
    Location
    Catlett, VA
    Posts
    110
    It looks tight, but the PDM60 fits fine just behing the battery. I have a ground block, flasher module, and Isolator module installed there too....
    NoVA
    '12 K1600GT

  4. #4
    Registered User
    Join Date
    Jun 2010
    Location
    Loveland, Colorado
    Posts
    8
    The only cautions when adding a J&M CB are, 1; hook-up the power to a permanently hot and then the trip wire to a separate circuit. Do NOT hook up both wires to a PDM60 just the trip wire. 2; use a different antenna, I have a 3ft K40 that works great. The J&M antenna mount fro the K1600 works well. Also double check all your antenna grounds.

  5. #5
    Lost on purpose! Top_Speed1's Avatar
    Join Date
    Dec 2013
    Location
    Finger Lakes, NY
    Posts
    27
    Remember the PDM60 is completely waterproof, so where you see fit is the place.
    Business comes first, riding comes always. One puts bread on the table, the other eats all the bread. Oh well, I'm riding happy!
    Go-Karts 'R' us | Power-Sports Forum

  6. #6
    Registered User YBWEB1's Avatar
    Join Date
    Mar 2004
    Location
    near Boston, Mass
    Posts
    17
    I mounted the PDM60 on the right side. You can see it in the upper-left of this picture. The lights are visible in the white rectangle.

    P1010705pdm.jpg

    I love the PDM60.

    Dave

  7. #7
    I ride with DOG 2bikers1collie's Avatar
    Join Date
    May 2014
    Location
    Cape Cod, MA, USA
    Posts
    577
    I put my PDM60 under the seat in place of the anemic tool kit that comes with the bike.
    ---
    Jess & Christine, the Chauffeurs, for Tobi & Skye the Border Collies.
    2013 K1600 GTL (the boys' ride), 2016 S1000XR (The grrrl's ride)
    Motorcycle Safety Foundation Coach#166465

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •