• Welcome Guest! If you are already a member of the BMW MOA, please log in to the forum in the upper right hand corner of this page. Check "Remember Me?" if you wish to stay logged in.

    We hope you enjoy the excellent technical knowledge, event information and discussions that the BMWMOA forum provides. Why not take the time to join the club, so you can enjoy posting on the forum, the club magazine, and all of the discounts and benefits the BMWMOA offers?

    Want to read the MOA monthly magazine for free? Take a 3-month test ride of the magazine; check here for details.

  • NOTE. Some content will be hidden from you. If you want to view all content, you must register for the forum if you are not a member, or if a member, you must be logged in.

Owners News Spine Art

Can you put the Feb issue in there for spacing? :) Looking a little like a 90's R1200 cruiser so far.

Good eye if you can see a bike so far!! I thought about it but wasn't sure it do any good. I will look at that in the future next time I update the picture.
 
Good eye if you can see a bike so far!! I thought about it but wasn't sure it do any good. I will look at that in the future next time I update the picture.

Using any ON, other than the Feb issue, covered with white paper will give you the correct spacing.
 
Using any ON, other than the Feb issue, covered with white paper will give you the correct spacing.

Do we even know if the office/printer considered that? Look at the red line near the top...look at the position at the bottom of the image and the dates...even with spacing, that's not going to get any better. I think I see most of an "A" in the first ON and what might appear to be the other part of the "A" in the second spine. The spine images are not adjusted vertically. If this is truly part of a "A", then putting a blank ON in between would only make things worse.
 
Do we even know if the office/printer considered that? Look at the red line near the top...look at the position at the bottom of the image and the dates...even with spacing, that's not going to get any better. I think I see most of an "A" in the first ON and what might appear to be the other part of the "A" in the second spine. The spine images are not adjusted vertically. If this is truly part of a "A", then putting a blank ON in between would only make things worse.

That's true.
 
Just noticed that October's ON is also no printed spine. Hmmm...

Update 12/31/22: Finally got around to adding the rest, minus the two without the spines.
 
Figured I'd close out the era. Since they've gone to a stapled binding, the January 2023 issue was the last for Spine Art. :bow

Spines2023-1.jpg
 
Back
Top