Results 1 to 7 of 7

Thread: K100 1986 fairing repairs

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    K100 1986 fairing repairs

    What is the best material to use when repairing the front fairing? There is damage around the mirror area and the top left molded in mounting nut has broken free.
    The base material is white and looks to have some fiber.

  2. #2
    A bozo on the bus deilenberger's Avatar
    Join Date
    Mar 2003
    Spring Lake NJ, USA
    Repairs I've seen made on the BMW composite fairing parts have generally been done with fiberglas patches for strength, then something like Bondo to get a smooth paintable surface. The trick is to prepare the fairing part so the fiberglas resin has a good clean surface to bond to.. that's usually done on the inside of the fairing where it can't be seen. Then the cracks on the outside are grooved a bit to get rid of flaking/fuzzy edges and filled with bondo - sanded down, spot putty used to fill small imperfections - and painted.
    Don Eilenberger
    Spring Lk Heights NJ NJ Shore BMW Riders
    '12 R1200R - I love this bike!

  3. #3
    Fortis Fortuna Adiuvat Omega Man's Avatar
    Join Date
    Jan 2010
    You don't mention where you are located but if you are near water, a marine supply will be able to help. A good read as to "how to" along with the supplies is Here at West System.
    "You can do good or you can do well. Sooner or later they make you choose." MI5
    Mod Squad
    2009 F800GS 1994 TW200

  4. #4
    I am not an expert, but I have done my share of body work. I also used to work at a marina (which was also a Motorcycle shop) when I was younger.

    Here is what I did this Spring to my bike.

    I redid the styling of an old Luftmeister fairing. I used the standard Bondo brand of fiberglass, with the glass screening (to re-shape and cover over larger holes) and then the Bondo brand "bondo" putty to fill, sand and smooth. Warning, the bondo fiberglass is extremely hard once hardened (be sure to keep the glass cloth BELOW the finish surface as it will not smooth out, but leave marks when sanded) so make sure you build up, and use coarse wet or dry to get down to surface and then finer to finish.

    However, I had my bike painted by a professional shop that does high-end cars and is the local exclusive body shop for the local BMW car dealer.

    When talking to them, the manager suggested I use a product called "Duraglass" when I needed to fill, but not fill with glass and not use the cloth. Then, after building up with Duraglass to surface desired, use the Bondo puttty to fill and smooth and finish sand.

    This Duraglass (sold in a can about the same diameter as a gallon paint can, but only about 3" tall) really worked slick. It is only sold at a auto body paint supplier. You will not find it at any AutoZone or the like. It Saved the messiness of the cloth with the sloppy resin and all that sticky mess. It was still messy, but not as much.

    This dried in about 1/2 hour - ready for the next cote. Worked great and I think would be great for your application. Trick is to be sure your initial surface is very clean and well sanded (not smooth) so fiberglass will stick.

  5. #5


    I am great full for the replies I have used epoxy for boat repairs and I was uncertain about the base material of the faring. I will try the Duroglass and Bondo
    Cheers Bob

  6. #6

    Repair started

    After striping the fairing of all parts I found that it had been repaired before. The fiberglass tape used on the inside was not well bonded and just pealed off with no resistance. I will do some tests with different things till I find what bonds well. Starting to get cold so this may take time.
    Cheers Bob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts