Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
A buddy (Jeff448) and I are planning to do a clutch spline lube on my 2000 R1100RT sometime in the next month.
I'm looking for specific, step-by-step instructions for an R1100RT. I've found instructions for an R1150RT, but not an 1100.
Thanks, Rich
The 1100RT is the same as the 1150RT except it has a mechanical clutch. There is a very detailed video of the entire procedure done on an 1100RT. Search for it. PM me if you can't find it. ( It's too large to post or email. It's on a DVD, but very, very detailed and a must if this is your first spline lube. )
So..oo.. does that mean Dieselyoda is the yang to Roger 04 RT's yin? I gotta say we appreciate you both.
Weather the winter well, wrench lots, tip a Molson by the fire for us all.
Ralph
Should just add that "rip, tear, horse, pop and boo" are my terms and do not reflect the "gentlemen/gentlewoman" that some perceive Beemer owners are. I also don't have a spreadsheet to show you how ripping, tearing, popping or horsing the clutch out to have a good look will increase your fuel economy or make your bike start a half second better.
I do enjoy reading some of your humourous comments DY. Some of it is probably even funnier if you're Canadian. I can certainly do without the cheap shots that are obviously aimed at Roger04RT. I don't know or actually care what your issue is but the facts are Roger has contributed an awful lot of great work and advanced our knowledge here in the BMW community. He generously shares his well researched findings with all of us. These obvious slurs and insults serve no purpose here.
So how about you knock it off eh?
Jeff448 & I (mostly Jeff) started the spline lube on my 2000 R1100RT yesterday.
![]()