tullypilot
New member
I bought an altitude plug (contact ring) for my trip through the mountains but it came with no instructions. Where does it plug in?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
it still idled poorly on Mt. Evans...
Probably too lean at 14,200 feet; but it ran quite well lower down.
On my '87 K75S, it was under the rear of the seat on the left side.
'Twas a long long time ago with several bikes in between...
All good info nonetheless.
I've been looking on the A&S and MAX parts fiches - what page is it on? Ya got me curious now.
Looked on the link on #3 and it was not there
You have other problems if it idled poorly. Chances are your base mixture is wrong or the valve adjustment is wrong.
Many of us also did the spliceroo and installed a rocker switch in the dashboard where the key is. Then we could just toggle it into the circuit or not, depending on altitude. It did make a difference on my '85 K100RS.