• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

Throttle lock '12 R1200GS

sloride

New member
Any suggestion for a throttle lock that fits a GS with heated grips and hand guards
 
Last edited by a moderator:
Kaoko

Kaoko is considered the best choice for R1200GS. And this is not just my opinion, check AdvRider. I cannot share my personal experience as I just installed it yesterday.
 
I have a :thumb Kaoko throttle lock, have about 9K on it and love it?. easy to use and works great with the heated grips on the R1200GS?
I also have the throttlemeister on my Hayabusa and have about 33K on that but I prefer the Kaoko over the throtlemeister. :)
 
Kaoko:)

Had the Kaoko almost 5 years, all good:). GSA1200'07 at 95000m now. I absolutely DO NOT miss my electric cruise on older KLT1200, as the manual Kaoko has suited me just fine. Sometimes simple works great too:). Randy
 
Excelthrottlelocks from Tom at Excel cycle werkes.I have one of his originals on my gs.Check his website.Ed
 
GS Throttle Lock

Been using the Throttlemeister on my 2012 GS with good results. (had one on a previous bike as well)
It's a high quality item and works great, check it out. Works with heated grips and factory hand guards too.
A little pricy but worth it IMO.
 
+1 on the excelthrottle control. I've hade the twist types and my thick gloves in winter will at times work the lock to a locking position, or to resistance anyway, and when I think I'm releasing the throttle it sticks open. Just a little surprised at times! And,,,, I just don't like having to always be twisting it on and off. So, for me, this little device really is slick. . http://www.excelthrottlecontrol.com/
 
Thanks for the suggestions.

I think I have it narrowed down to the Excel, Vista, Kaoko

Does anyone have hands on experience with the Visa Cruise?
 
Some additional reading below. I actually used the NEP, similar to the Vista but cheaper and works better (IMO). Enlarged the center to fit the grip diameter. Dremel work on the left side to clear the switch housing. Anchored the bottom to something secure with a zip tie to keep it from moving. I did not use any screws or drill any holes or alter the switch housing in any way. Perfect fit between the housing and the grip. Flip on, flip off, simple as pie.

http://www.advrider.com/forums/showthread.php?t=470646
http://www.advrider.com/forums/showthread.php?t=878817
 
Thanks to everyone for taking the time to give me suggestions and opinions

I ordered the Vista Cruise mostly because I had one in the past ,it's been awhile but I remember being satisfied with it .
 
Back
Top