New Fuzeblock on 12 R1200RT

Danclower · Feb 4, 2013

I need some help. I installed a fuzeblock on my RT this weekend. It went well, no problems, but I remember reading a post about resetting the throttle after disconnecting the battery but I cannot remember the post or the procecure.

Thanks for the help I hope I get

Dan Clower
Ventura Ca
2012 R1200RT

marchyman · Feb 4, 2013

Turn on ignition. Rotate throttle from full off to full on. Repeat. Turn off ignition. That teaches the engine management system what full throttle looks like.

bobframe · Feb 5, 2013

marchyman said:
Turn on ignition. Rotate throttle from full off to full on. Repeat. Turn off ignition. That teaches the engine management system what full throttle looks like.

Is that a trick my '06 GS needs?

lkraus · Feb 5, 2013

bobframe said:
Is that a trick my '06 GS needs?

It's recommended every time the battery has been disconnected. The engine management system will probably adjust without this step, but it will take longer and may not run as well until it does. It cannot hurt, in any case.

Danclower · Feb 5, 2013

Throttle reset

marchyman said:
Turn on ignition. Rotate throttle from full off to full on. Repeat. Turn off ignition. That teaches the engine management system what full throttle looks like.

Thanks for the info

Dan

New Fuzeblock on 12 R1200RT

Danclower

New member

marchyman

Cam Killer

bobframe

New member

lkraus

New member

Danclower

New member

Similar threads

Forum statistics

Share this page