Results 1 to 15 of 40

Thread: Slash 5 Flywheel removal

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User kwb210's Avatar
    Join Date
    Jul 2009
    Washington, the state

    Slash 5 Flywheel removal

    The bike: 1972 R75/5 about 55,000 miles, parked for many many years, getting a once over before moving to the category of "rider". I'm pulling the flywheel to inspect and replace the rear main seal as well as the oil pump O ring. Removed the 5 bolts in flywheel and she is stuck! I don't want to use a puller as that might push the crank forward, it is blocked but does not seem worth the risk. I thought of using a dead blow hammer attached to a bolt screwed into the wheel. So, I am looking for suggestions on the safe removal of the flywheel.
    Attached Images Attached Images
    1977 R100/7 1971.1972.1972.1973 R75/5
    1974 R90/6 multiple boxes
    Airhead Revival
    "Objects in the mirror appear to be losing" unk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts