Dum vivimus vivamus
There are some good Youtube videos showing people doing it - here is a good one for a K1100, same concept
"A good stick is a good reason
The old metal rim was still in there - Back to clean up
Last edited by Slipster; 10-22-2012 at 09:03 PM.
Reason: Found out the problem
Expect The Unexpected
Installed the seals. Used ThreeBond Sealant. Installed and let the gasket sealant cure.
Put fluids in. Took it for a ride. No anything out the weep hole. No anything around the pump. Whew!. Thanks to all for your great guidance and support.
Everything is easy once you know how