Results 1 to 3 of 3

Thread: Final Drive Problem

  1. #1

    Final Drive Problem

    I have had a problem with my '07 K1200GT final drive. It's spline-like connection at the hub wore to the point that it became loose and wobbled side to side. Since other bikes have a similar final drive i.e., GS and RT bikes, I'm wondering how many others have had this same problem and what they did to fix it?
    Last edited by eastman; 06-21-2012 at 10:35 PM.

  2. #2
    Check with your dealer. Early on some of the K1200 bikes had this problem. There was a campaign of some type - recall maybe - to address improperly hardened or machined splines on the wheel flange/axle tube.
    Paul Glaves - "Big Bend", Texas U.S.A
    "The greatest challenge to any thinker is stating the problem in a way that will allow a solution." - Bertrand Russell

  3. #3
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Evansville, WI
    Could try posting at the website too, there are a fair number of people there with the wedge-engine GT's, or is another source.
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts