Linkage bracket and spring for R90/6 stock center stand
Fellow Airheads! I am really proud of my recent efforts in removing the OEM side stand from my '76 R90/6 and replacing it with a Brown side stand. All's good so far....the rub is that in removing the stock stand, I had to, of course, push the front through bolt in enough to remove the stand. The problem is that I cannot for the life of me figure out how to put the linkage bracket and spring back on the left side of the frame. Before taking off, now I have to physically bend down while sitting on the bike and lift the center stand up by hand because there is only one spring on the right side. Not good for the long run. Anyone have any experience on this one? Thanks in advance brothers and sisters.
Tags for this Thread