Starter Motor overhaul on a 1992 BMW K75S
The articles, posts and comments in this tech section are posted by individual members and reflect their personal thoughts and experiences with repairing, maintaining, and generally working on motorcycles. This information may require specific knowledge and skills, may or may not be correct or current to model.
The authors of information found here and the BMW MOA take no responsibility for ensuring the accuracy of any information (including procedures, techniques, parts numbers, torque values, tool usage, etc.), or further for any damage of any kind or injuries incurred or caused by anyone following the instructions or information found here.
It is the duty of the individual to either assume the liability himself for responsibly using the information found here, or to take the bike or accessory to a Dealer or other qualified professional service.
Lastly, please ensure you dispose of your used chemicals, oils and fuels in an environmentally responsible manner. Most Auto Parts stores and service stations will accept used oil and lubricants, tires and batteries, please check for your local availability.
This article, text and photos are Copyright of the individual authors and the BMW MOA, any copying or redistributing is permitted only by prior written authorization.
Overhauling the starter motor is not that difficult and hopefully the step-by-step process IÔÇÖve outlined below will make it as straightforward as possible. The first step is to decide whether you want to just clean the starter commutator or if you want to replace the brushes as well. I found that replacing the brushes was relatively inexpensive and did not involve much extra work so thatÔÇÖs what IÔÇÖve outlined in this DIY article. The part numbers I ordered are as follows:
12411459567 (Brush connected to ground wire nut)
12411459297 (Brush plate)
- Locate starter motor
- Remove and disassemble starter motor
- Clean/overhaul starter motor
- Reassemble and install
- Replacement brushes and misc. parts
- Brake cleaner
- Scrub pad/wash cloths
Last edited by mnbikerguy; 05-24-2011 at 11:58 AM.
Tags for this Thread