Results 1 to 5 of 5

Thread: New Hall sensor only firing one sensor

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User
    Join Date
    Apr 2006
    Location
    maine
    Posts
    190

    New Hall sensor only firing one cylinder

    Bike is 98 R1100RT. 33K miles. I replaced a good original hall sensor with a new hall sensor. Bike was running fine with the old one. Started bike after installing new one and bike is only running on left cylinder. Removed pulley and rechecked timing by setting engine at top dead center and listening for fuel pump to switch on, it does. Checked to make sure of proper placement of pulley tab, it is correct.

    Put everything back together and still only running on one cylinder. Changed sparkplug, made no difference.

    Guess I fixed it till I broke it.

    What could it be?

    Thanks,
    Mark
    Last edited by mark from maine; 05-20-2011 at 06:43 PM. Reason: attemted to change title

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •