• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

93 K75S Rear Mud Flap

ghyber

New member
I want to add the BMW rear mud flap extension.

Does anyone have this extension and would they mind posting a picture of it and letting me know if the parts on the A&S microfiche are accurate?

The mud flap I seem to have is the one labelled number 1. What I am looking for is the part number 10. However, my mud flap does not already have the two pre-drilled holes on the bottom. Not a big issue, I know, however, I would like to confirm the correct part before ordering.

Rearmudflap.gif
 
9 works, too. I put one on a K100 with a EML side car. We had put a larger square tire on and #9 just gave better coverage for the wider tire.
 
Mud Flap Extension Decision

OK, so we're unanimous that the #10 is the correct mud flap extension that I will add on to the already existing standard mud flap on the K75S?

I will punch/drill two holes and screw it on and it will fit like a glove, right?
 
OK, so we're unanimous that the #10 is the correct mud flap extension that I will add on to the already existing standard mud flap on the K75S?

I will punch/drill two holes and screw it on and it will fit like a glove, right?

IIRC - it also comes with some double-faced sticky foam tape that goes between it and the existing fender... that plus a few screws - it's not going anywhere.
 
Back
Top