Results 1 to 15 of 30

Thread: KGT Air Cleaner Replacement

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725

    KGT Air Cleaner Replacement

    The articles, posts and comments in this tech section are posted by individual members and reflect their personal thoughts and experiences with repairing, maintaining, and generally working on motorcycles. This information may require specific knowledge and skills, may or may not be correct or current to model.

    The authors of information found here and the BMW MOA take no responsibility for ensuring the accuracy of any information (including procedures, techniques, parts numbers, torque values, tool usage, etc.), or further for any damage of any kind or injuries incurred or caused by anyone following the instructions or information found here.

    It is the duty of the individual to either assume the liability himself for responsibly using the information found here, or to take the bike or accessory to a Dealer or other qualified professional service.


    Lastly, please ensure you dispose of your used chemicals, oils and fuels in an environmentally responsible manner. Most Auto Parts stores and service stations will accept used oil and lubricants, tires and batteries, please check for your local availability.


    This article, text and photos are Copyright of the individual authors and the BMW MOA, any copying or redistributing is permitted only by prior written authorization.
    Last edited by Semper_Fi; 06-14-2010 at 07:55 PM.
    2011 R1200 GSA Smoke Grey Metallic Matt
    2009 G450X White
    IBA #35651
    Rogue Moderator

  2. #2
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725
    TOOLS:

    T-25

    PROCESS OVERVIEW

    • Remove Throttle Side Panel
    • Unbolt bike computer
    • Pull out locking pins on air box
    • Remove snorkle assembly with air filter
    • Remove and replace air filter
    • Insert air filter into snorkle
    • Install Snorkle and filter onto bike
    • Install bike computer
    • Install Throttle Side Panel
    Last edited by Semper_Fi; 06-14-2010 at 07:58 PM.
    2011 R1200 GSA Smoke Grey Metallic Matt
    2009 G450X White
    IBA #35651
    Rogue Moderator

  3. #3
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725
    Take side panel off - to do so you need to remove the following T-25 bolts

    3 in the glove compartment

    1 on the inside by the tank

    3 along the bottom of the panel

    4 along the inside egde of the panel

    Shown below are the three for the glove compartment
    Attached Images Attached Images
    Last edited by Semper_Fi; 06-14-2010 at 08:01 PM.

  4. #4
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725
    This is the bolt by the tank - it is also the longest one at 50mm
    Attached Images Attached Images

  5. #5
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725
    These are the lower three panel screws.

    Please note that #1 is 16mm; #2 is 20mm;#3 is 16mm
    Attached Images Attached Images
    Last edited by Semper_Fi; 06-20-2010 at 05:34 PM.

  6. #6
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725
    There are 4 inside screws

    Should below is the top one - which is 16 mm
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •