The filling process continues.
The green arrow shows the current oil level, the yellow arrow is where we need to be.
At this point about 2.5L of oil have been put in
The filling process continues.
The green arrow shows the current oil level, the yellow arrow is where we need to be.
At this point about 2.5L of oil have been put in
Just right! Stage 1 complete.
About 2.75L
STAGE 2 - Now that the oil tank is at the correct level, turn the engine on for 20 seconds.
STAGE 3 - After the bike has been shut off, put in the balance of the required oil - to total 3.5L and go for a test ride.
You can ride the bike with out the lower covers.
I went for a quick spin around the block.
Once you return from the road test - check the oil level - and verify that it shows full, add as neccesary.
At this point the oil change is done and you can put the lower panels back on in the opposite order that they were removed.
2011 R1200 GSA Smoke Grey Metallic Matt
2009 G450X White
IBA #35651
Rogue Moderator