• Welcome Guest! If you are already a member of the BMW MOA, please log in to the forum in the upper right hand corner of this page. Check "Remember Me?" if you wish to stay logged in.

    We hope you enjoy the excellent technical knowledge, event information and discussions that the BMWMOA forum provides. Why not take the time to join the club, so you can enjoy posting on the forum, the club magazine, and all of the discounts and benefits the BMWMOA offers?

    Want to read the MOA monthly magazine for free? Take a 3-month test ride of the magazine; check here for details.

  • NOTE. Some content will be hidden from you. If you want to view all content, you must register for the forum if you are not a member, or if a member, you must be logged in.

EZ Pass Install

Semper_Fi

Honey Badger
As a follow up to this post, i decided to mount the EZ Pass and test it.

All I need to remove was the windshield and the top plastic cover.

I then cleaned the back off with alcohol and mounted it:
01 EZ1.jpg

After mounting it I installed the plastic cover and check it out - it looks good but I knew the white plastic on the black background was going to drive me nuts
02 EZ2.jpg

I then removed the plastic panel and wrapped the exposed/visble areas with black electrical tape:
03 EZ3.jpg

Then mounted it - much more tolerable:
04 EZ4.jpg

No issues being seen in the EZ Pass Lane.

:beer
 
Back
Top