As a follow up to this post, i decided to mount the EZ Pass and test it.

All I need to remove was the windshield and the top plastic cover.

I then cleaned the back off with alcohol and mounted it:
01 EZ1.jpg

After mounting it I installed the plastic cover and check it out - it looks good but I knew the white plastic on the black background was going to drive me nuts
02 EZ2.jpg

I then removed the plastic panel and wrapped the exposed/visble areas with black electrical tape:
03 EZ3.jpg

Then mounted it - much more tolerable:
04 EZ4.jpg

No issues being seen in the EZ Pass Lane.