I had one of those 'what was I thinking' moments yesterday. I was cleaning and re greasing the rear wheel splines on my 100RT and used gasoline on a toothbrush to remove the old grease. ( no ignition sources in my work area, so I won't be reporting a burn down).

I usually use parts cleaner or similar so as not to leave residue, but I had some gas from my recently emptied float bowls, so...

Question. In using gaso with about a 5 minute dry time before applying moly lube, have I risked degrading the grease?

Should I just take it apart and re do, or do I have some miles before I pull it apart again ?

Thanks,
Steve