G
getset
Guest
Hello, I just purchased a 78 R100/7, and it came with a few things that I would like to fix.
First and foremast is the lack of an oil pressure switch. The previous owner removed it and plugged the hole with a bolt and washer. Not to mention the wire that is supposed to plug onto it seems to be missing. There is a brown wire running along the bottom of the frame on the left side, but any connector has been removed, and I am not certain what color the wire is supposed to be. It looks like the wiring diagram has it as either a brown and green wire, or a purple and green wire. (I can't tell in the clymer color coded guide). Can someone tell me what color the wire is supposed to be, and where it might be routed?
The other wires I am not sure about are a pair, one is brown, and the other is yellow and red. They plug into the main harness right in front of the tank and then they are cut. I believe that the brown is a ground.I am not sure about the other but I think the yellow and red one is either for the clutch switch (what is that? does it allow you to start the bike in gear?), or the turn signal buzzer (Not sure what this is either. Does it actually buzz when the turn signal is on?)
Any help is greatly appreciated.
Cheers
Josh
First and foremast is the lack of an oil pressure switch. The previous owner removed it and plugged the hole with a bolt and washer. Not to mention the wire that is supposed to plug onto it seems to be missing. There is a brown wire running along the bottom of the frame on the left side, but any connector has been removed, and I am not certain what color the wire is supposed to be. It looks like the wiring diagram has it as either a brown and green wire, or a purple and green wire. (I can't tell in the clymer color coded guide). Can someone tell me what color the wire is supposed to be, and where it might be routed?
The other wires I am not sure about are a pair, one is brown, and the other is yellow and red. They plug into the main harness right in front of the tank and then they are cut. I believe that the brown is a ground.I am not sure about the other but I think the yellow and red one is either for the clutch switch (what is that? does it allow you to start the bike in gear?), or the turn signal buzzer (Not sure what this is either. Does it actually buzz when the turn signal is on?)
Any help is greatly appreciated.
Cheers
Josh