robertklee
New member
Cresent wrench
One small cresent wrench will take up lots less space than all those open end wrenches.
One small cresent wrench will take up lots less space than all those open end wrenches.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
One small cresent wrench will take up lots less space than all those open end wrenches.
For my 2007 RT I need a deep socket 16mm for the muffler clamp and a 50mm Torx for the rear wheel. Sears has them.Besides a spare EWS antenna ring, that is. I am just putting mine together. So far, I have a Torx folding key set. I am getting ready to order a 3/8 drive Torx T40, T45 and T30. Then I'll put in a compact 3/8 ratchet and about a 10" extension and a 14mm socket to fit the muffler clamp (or is that a 13mm?). Then, the stock tool kit goes to Rochester Iron & Metals on my next scrap run.
Got this right away as it's specifically made for the GS. I also pack a Cycle Pump.
I've found this tool very handy. I keep it in the tank bag and often it is all that is needed to handle minor issues.
$14 at http://www.advdesigns.net/inga.html
I just updated my Adventure Designs tool kit with the new "tool roll". This is the best tool kit that I have found. I have been to a few rally's and someone is always looking for a odd tool. It seems that I have always come to the rescue with mine.
http://www.advdesigns.net/ulcobmwr1gsg.html
Ferd
Is it possible for you to post a photo of the torx set on the magnetic rail? I have all of these tools but I find it awkward to carry the torx sockets in my tool roll--I'd like to see what kind of rail they are using and see if I could just buy that part somewhere.
Thanks!